AT&T Plug&Share 6800G - Manual (Page 18)

Basic System Settings
AT&T Plug&Share ™ 54 Mbps Wireless Router 6800G 18
ISP Connection Type: Dynamic IP Address
This setting is usually required for use with cable modems. Choose this setting if you don’t have to log
on to the Internet when you turn on your computer (IP addresses are assigned by your ISP).
Basic > Advanced > Admin > Status > Shortcuts > Help
• Host Name: (Default ATT.Router) Enter a host name here if required by your Internet Service Provider.
• MAC Address: Enter a MAC (Media Access Control) number if required by your Internet Service
Provider. By default, the number used is the MAC address of the WAN interface in the router. You can
click the Copy MAC Address button to insert the MAC address of the Ethernet card in your computer.
Wizard
Wireless
ISP Connection
DHCP