AT&T Plug&Share 6800G - Manual (Page 9)

Setup Wizard
AT&T Plug&Share ™ 54 Mbps Wireless Router 6800G 9
Set Dynamic IP Address
The following screen appears if you select Dynamic IP Address as your Internet connection type.
Basic > Advanced > Admin > Status > Shortcuts > Help
Set PPPoE
The following screen appears if you select PPPoE as your Internet connection type.
Host Name: If your ISP requires that you enter
a host name, enter it here.
MAC (Media Access Control): The address of
your computer’s network adapter should
appear here as the default. It is usually not
necessary to change it.
Click Next to display the Wireless LAN
Connection screen (see next page).
Enter the user name and password you use
for access to your Internet Service Provider.
If your ISP requires you to use a service
name, enter it here.
Click Next to display the Wireless LAN
Connection screen (see next page).
Set Static IP Address
The following screen appears if you select Static IP Address as your Internet connection type.
Delete anything that appears in these fields
when the screen is displayed, then enter the
WAN and DNS addresses provided by your
ISP.
Click Next to display the Wireless LAN
Connection screen (see next page).
Wizard
Wireless
ISP Connection
DHCP