Aastra Telecom 6755i - Manual (Page 156)

148 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
None Key
You can set a softkey, programmable key, or expansion module key to force a blank entry on the
IP phone display for a specific key. You do this by setting the key to "none". The keys are added
in order (from key1 to key20) after any hard-coded keys have been added. If a particular key is
not defined, it is ignored. For more information about key behavior, see
“Key Display Behavior”
on page 64 .
Configuring a None Key
Use the following procedure to configure a None key on the 6755i IP Phone. The procedure
shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select None.
Aastra Web UI