American Megatrends III User Manual
Page 16
Apollo III PCI Pentium ISA Motherboard User’s Guide
12
Step 2 Configure CPU,
Continued
Important
If you are not sure about the voltage specification
for the CPU that will be installed in this
motherboard, please call Intel and make sure that
you set the voltage jumpers correctly. Selecting the
wrong voltage may damage the CPU.
Install CPU
Install the CPU in the ZIF (zero insertion force) socket by performing the
following steps. The CPU socket is near one edge of the motherboard.
Warning
Improper CPU installation can damage the CPU
and the motherboard. You must follow the
procedures in this section exactly as documented.
Make sure you wear an antistatic wristband while
installing the CPU.
Step
Action
1
Lift the lever on the ZIF socket. The empty CPU socket
looks like this.