Aspecifications, Bootblock code checkpoint codes – American Megatrends III User Manual

Page 72

Advertising
background image

Apollo III PCI Pentium ISA Motherboard User’s Guide

68

Bootblock Code Checkpoint Codes

Code

Description

E0h

Verify the bootblock BIOS checksum. Disable the internal
cache, DMA, and interrupt controllers. Initialize the
system timer. Start memory refresh.

E1h

Initialize the chipset registers. Set the BIOS size to 128K.
Make the 512 KB base memory available.

E2h

Test the base 64 KB of system memory. Send the BAT
command to the keyboard controller. Make sure that
<Ctrl> <Home> was pressed. Verify the main system
BIOS checksum.

E3h

The main system BIOS is good. Transfer control to the
main system BIOS.

E4h

Start the memory test.

E5h

The memory test is over. Initialize the interrupt vector
table.

E6h

Initialize the DMA and interrupt controllers.

E7h

Determine the CPU internal clock frequency.

E8h

Initialize the I/O chipset, if any.

E9h

Program the CPU clock-dependent chip set parameters.

EAh

Enable the timer and the floppy diskette interrupt. Enable
the internal cache. Copy the bootblock BIOS and pass
control to the bootblock BIOS in the 0000h segment.

EDh

Initialize the floppy drive.

EEh

Look for a diskette in drive A:. Read the first sector of the
diskette.

EFh

Floppy read error.

F0h

Search for AMIBOOT.ROM in the root directory of the
floppy diskette in drive A:.

F1h

The AMIBOOT.ROM file is not in the root directory.

F2h

Read the FAT. Analyze the FAT to find the clusters
occupied by the AMIBOOT.ROM.

F3h

Start reading the AMIBOOT.ROM file, cluster by cluster.

F4h

The AMIBOOT.ROM file is not the correct size.

F5h

Disable the internal cache. Raise the Vpp. Enable Flash
write and reset the Flash ROM.

FBh

Detect the flash type.

FCh

Start erasing flash blocks.

FDh

Program the Flash ROM in the E0000-EFFFFh region.

FEh

Start programming Flash at F0000-FFFFF region.

FFh

Flash programming is successful. The computer reboots.

A

Specifications

Item

Description

CPU

Intel Pentium 75, 90, 100, 120, 133, 150, 166, 180,
200 MHz or higher speed CPU

Upgrade CPU

Intel P54C series, P54CT, or P55C with an optional
split voltage regulator module.

Chipset

Intel 82430HX, including CPU interface controller,
advanced cache controller, integrated DRAM
controller, synchronous ISA bus controller, PCI local
bus interface, and integrated power management unit.

Advertising