Aastra Telecom ATP-CNX-020 - Manual (Page 14)

Introduction
xiv ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Aastra CNX Quick Installation and Setup Guide
What is in the Aastra CNX shipping package?
The Aastra CNX is carefully and securely packaged within the shipping container.
Upon opening the shipping package, inventory the contents to be sure there are no
missing or damaged parts. The following parts are included:
• One Aastra CNX unit
• One Power cable (for connection to AC power source)
• One DB-9 to DB-9 console cable
• One CompactFlash memory card that contains the software required to
operate the unit (for use in CompactFlash memory slot 1)
• One set of rack mounting brackets with six Phillips head screws
• One Aastra CNX Technical Documentation CD ROM
• One CD ROM envelope with License Key label
For a list of additional parts that you need to install the Aastra CNX (which are not
included in the shipping package), see the section,
“Aastra CNX Installation and
Setup Procedures” on page 1 .
Aastra CNX unit
Power cable
CompactFlash card
Rack mounting brackets with Technical documentation CD ROM
CNX POWER
STATUS
1 2 COMPACTFLASH
ALARM ACTIVE 1
10/100 ENET T1 / E1
2 1 2 3 4
Phillips head screws
License Key: 996-555-1e9-f65-421-e85
License Key: 996-555-1e9-f6
License Key: 996-555-1e9-f6
CD ROM envelope with
license key label
License Key
Console cable