AMX PTM-D15 - Manual (Page 14)

Installation and Wiring
8 PTM-D15 15" Platinum Touch Panel
4. Verify that the folds/latches at the bottom of the bracket are securely located within the fixing
grooves.
5. Align the screws holes (on the rear of the panel) with the openings at the top of the bracket
(FIG. 6).
6. Insert the two screws into their respective locations and begin tightening until the screws are
securely fastened into the panel.
7. Verify that the panel is securely connected to the Table Top Bracket at both ends.
FIG. 5 Fixing grooves on rear of the panel
FIG. 6 Attaching the Table Top Bracket to the rear of the panel
Screw Holes
Table Top
Support Bracket
Fixing
Grooves
(2 rows)
Screws holes
Screws (2)
Fixing grooves