Panasonic -eng - Manual (Page 14)

14
Available Cards/Discs/Files
Introduction
recording software is running, start recording with this
software.)
- Connection cables for a PC or DVD device are inserted or
removed, or the power is turned on or off.
- This software is forcibly closed.
- When using an external DVD drive, do not remove or
insert the connection cable while data is being recorded.
Doing so may cause the software to malfunction or corrupt
the data.
∫ Playback and use of produced discs
• The produced discs will not function with software that does
not support the AVCHD standard. (It is also impossible to
display the data in Explorer.)
• For DVD-R discs with dual layer on single side, images may be
frozen or sounds may be inaudible for a moment when shifting
from the first layer to the second layer, depending on the
player.
• Do not delete or revise the folders on the discs and the files in
the folders. The data may not play back.
• To copy the image data on an SD card or to record data on
an SD card, a high definition video camera or an SD card
reader/writer that can read and record on an SD card are
required. (For an SDHC memory card (4 GB), a device
supporting the SDHC will be required.)
(For the operation method, refer to the operating
instructions for each device.)
• SD cards must be initialized (formatted) with the high
definition video camera that this software is supplied with.
(For methods of formatting SD cards, refer to the operating
instructions of the high definition video camera.)
• If the write-protect switch has been set to [LOCK],
recording is not possible.
• Do not delete or revise the folders on the produced cards and
the files in the folders. The data may not play back.
Notes on use of SD cards
ENG-HDW1.0.book 14 ページ ２００６年１１月２１日 火曜日 午前１０時５１分