Panasonic -eng - Manual (Page 74)

74
When a problem occurs
Settings/Convenient information
Error occurs while data is recorded.
Data recording failed.
(Continued) z Data may not be recorded due to the affinity between the disc and the drive. Use a disc
that is recommended for the drive.
In some discs, data may not play back even if the recording was completed properly.
Therefore, execute playback confirmation after recording the data.
z The software may not operate properly depending on the conditions of the drive where the
OS is installed or the drive designated as the work area. Analyse the conditions of the hard
disk and optimize if necessary.
For a method of analysis, open [My Computer], right-click the icon for the hard disk, and
then select [Properties] >> [Tools] >> [Defragment Now] >> [Analyze]. Select [Defragment]
if necessary. However, do not execute optimization while this software is running.
z Do not operate other recording software. Doing so may cause unsuccessful recording or
damage the SD card or DVD disc. Do not operate any other application using the DVD
drive or the high definition video camera, or software consuming a large amount of
memory (recording or encoding software) in particular.
z If an ASPI driver for other recording software, scanners, or printers is installed, the
software may not operate properly. In this case, the ASPI driver must be uninstalled and
then this software must be installed again.
z If several hardware peripherals are connected to the PC, the data transfer operation
may become unstable and writing errors may occur.
When recording to an external DVD drive, in particular, confirm the operation after
disconnecting any peripherals using the same interface as the DVD drive.
z If other software that is capable of reading data from other UDF discs is installed, the
reading and/or recording operations for DVD discs may not execute normally. In this
case, close or uninstall the software.
z The firmware (control program stored in the main unit) for the DVD drive may cause this
problem. Since updates to the firmware are sometime available from the PC or drive
manufacturer, update the firmware to the latest version.
z The CD recording function supported in the standard configuration of Windows ® XP
may affect the software. The function must be disabled.
When the following problem occurs Confirm the following
ENG-HDW1.0.book 74 ページ ２００６年１１月２１日 火曜日 午前１０時５１分