Connecting the video camera to a pc – Panasonic -eng User Manual

Page 15

Advertising
background image

15

Introduction

Connecting the video camera to a PC

It is possible to copy image data on an SD card to a hard disk
on a PC or record image data on a hard disk onto an SD card
by connecting the high definition video camera to the PC.
(Some cameras cannot be used as a write drive. For details,
please refer to the operating instructions of the camera. In
such case, use an SD card reader/writer or other appropriate
devices for writing into an SD card).

Attention

z

For details, refer to the operating instructions for the high
definition video camera too.

z

Use an AC adaptor to power the PC. If the battery capacity
drops too low during data transfer, recording or copying
operations may not function properly.

1.

Prepare the high definition video camera.

• Install both the battery pack and the AC adaptor, and

then turn on the power of the high definition video
camera.

• Set the high definition video camera to the mode for

connecting to a PC. (For details, refer to the operating
instructions for the high definition video camera.)

2.

Connect the high definition video camera and the
PC using the USB connection cable.

• Insert the cable into the USB port firmly.

3.

Confirm that the high definition video camera is
recognized by the PC.

When [Removable Disk] appears in [My Computer], the
high definition video camera is recognized properly by
the PC.

Tip

z

Check that a card is not being accessed by the high
definition video camera, disconnect the USB connection
cable and then turn off the power on the high definition
video camera.

z

Double-click the [

] icon on the task tray, and select

[USB Mass Storage Device] and then click the [Stop]
button to remove the cable safely without displaying an
error message.

z

Do not remove the USB connection cable nor operate the
high definition video camera while data on the high
definition video camera is being transferred. Doing so may
cause a malfunction of the software or damage the data
being transferred.

z

The shape of the USB terminal varies with the high
definition video camera. Use the USB connection cable
that is supplied to the high definition video camera.

ENG-HDW1.0.book 15 ページ 2006年11月21日 火曜日 午前10時51分

Advertising
This manual is related to the following products: