Panasonic VideoCam Suite 1.0 - Manual (Page 6)

Introduction
6
Operating environments
System requirements for installation of VideoCam Suite.
PC IBM ® PC/AT compatible PC with CPU (including compatible CPU) of Intel ® Pentium ® III 800 MHz or
higher (Intel ® Pentium ® 4 1.8 GHz or higher recommended)
Operating System Microsoft ® Windows Vista ® Home Premium / Microsoft ® Windows Vista ® Home Basic
Microsoft ® Windows ® XP Home Edition SP2 / Microsoft ® Windows ® XP Professional SP2
Microsoft ® Windows ® 2000 Professional SP4
RAM Windows Vista ® : 512 MB or more (1 GB or more recommended)
Windows ® XP/2000: 256 MB or more
Display High Colour (16 bit) or higher (32 bit recommended)
Desktop area 1024
k 768 or higher
Video card supporting DirectX ® 9.0c (supports overlay of DirectDraw ® )
Hard disk DMA transfer effective at Ultra DMA/33 or more (Ultra DMA/100 or higher recommended)
Available hard disk capacity of at least 150 MB for installation
5 GB or more for work area when recording on a disc (when a single-sided, dual-layer (DL) DVD disc is
used, 10 GB or more)
• If compression setting is enabled, errors may occur during recording. Please uncheck [Compress this
drive to save disk space] in [Properties] on the hard disk drive.
Software Microsoft ® DirectX ® 9.0c or later
• If it is installed on a PC that does not support DirectX ® 9.0c, the PC may not operate properly. If you
do not know whether or not your PC supports DirectX ® 9.0c, contact the manufacturer of the PC.
Acrobat ® Reader ® 5.0 or later or Adobe ® Reader ® 6.0 or later (required to view this document)
• For Windows Vista ® , use Adobe ® Reader ® 8.0 or later.
Sound DirectSound ® support
Drive A drive that supports recording on DVD-R/DVD-RW/DVD-RAM
Interface USB terminal (USB 2.0 High Speed is recommended)
Other requirements Mouse or equivalent pointing device
SD card reader/writer (required to read and write the SD card)
MC20_eng.book 6 ページ ２００７年１０月２４日 水曜日 午後２時１分