Panasonic VideoCam Suite 1.0 - Manual (Page 79)

Settings/Convenient information
Detailed settings for the respective functions
79
5. [Auto run Setting]
By default, VideoCam Suite is automatically started
when you connect your video camera to your PC. This is
because automatic start is enabled.
If you do not want to start it automatically, clear [Enable
to Auto run of VideoCam Suite 1.0.].
Enable or disable the automatic start from the menu that
appears by right-clicking the [
] icon in the task tray.
Adjust the settings for data registration or display on a hard
disk.
1. [Target folder]
You can register your favourite folder on the [HDD] in the
media/folder selection area.
( l23)
2. [Display file extension]
When [ON] is selected, an extension (e.g. .mpg) is
displayed after the file name.
• [OFF] is selected as the default setting.
[HDD] panel
1
2
MC20_eng.book 79 ページ ２００７年１０月２４日 水曜日 午後２時１分