Panasonic VideoCam Suite 1.0 - Manual (Page 85)

Settings/Convenient information
Disc format
85
[Full Erasing]:
The disc will be physically formatted and all data on the
disc will be deleted. This process takes a considerable
length of time. Depending on the speed of the drive
and the disc itself, it may take more than 1 hour.
∫ In the case of DVD-VR format:
1 Select a drive.
2 Enter the name of the disk ([Volume label]).
3 Confirm the disc information.
• When data of video recording standard is recorded
on a DVD disc, the disc information and
representative images are displayed.
4.
Click the [Start] button.
5.
When the confirmation message is displayed, click
[Yes].
• If [No] is clicked, the display reverts to the previous
window.
6.
A message will be displayed when the formatting
process is completed. Click [OK].
Tips
z Only discs that can be used with this software ( l11) can
be formatted. (However, it is impossible to erase a DVD-R
disc.)
z For a double-sided disc, format one side first and then
format the other side.
1
2
3
MC20_eng.book 85 ページ ２００７年１０月２４日 水曜日 午後２時１分