Anco Eaglin A-E Cherry Burrell - Manual (Page 3)

S-Line connections consist of two matching ferrules, a gasket, and a
clamp. Utilizing these unions into a process piping system will
ensure easy assembly and disassembly of process lines and
equipment. If a change to a system becomes necessary, this can be
accomplished quickly and easily with S-Line fittings. These versatile
fittings were originally designed for both COP (clean-out of-place)
and CIP (clean-in-place) applications.
! Available in ½” through 12”
! Fittings are made of T304 & T316L stainless steel.
! Finishes are available in any standard combination.
# ID polish is 180 Grit and Unpolished
# OD polish is 150 Grit and Unpolished
! Electropolished S-Line Fittings are offered.
® ! Gaskets are available in Buna, EPDM, Teflon , FKM, and Silicone as a standard.
! Meets 3A and FDA requirements.
Sanitary Weld Fittings
Weld fittings are utilized in process piping systems where COP is not
required or where CIP can be accomplished. These fittings can be welded
manually or with automatic machines. Weld fittings are utilized to eliminate
unnecessary joints and dead leg zones for product to become entrapped.
! Available in ½” through 12”
! Fittings are made of T304 & T316L stainless steel.
! Finishes are available in any standard combination.
# ID polish is 180 Grit
# OD polish is 150 Grit
! Electropolished weld fittings are available upon request.
! Meets 3A and FDA requirements.
3:8
S-Line/Clamp Fittings
WCB-Flow Products offers the widest range of fittings with
several surface finishes available for use in a variety of industries.