Anco Eaglin A-E Cherry Burrell - Manual (Page 6)

6:8
WCBFP-XXX
Effective 10/04
Butterfly & Ball Valves
Butterfly and ball valves are used in a wide variety of sanitary, industrial and
chemical applications. The versatility of these valves allows these to be used as an
on/off valve, and /or to throttle the flow of product. This valve offering covers low
and higher-pressure applications and can handle viscous or non-viscous products
depending on the valve selected.
! Butterfly Valves
#
Available in 1” through 4”
# T304 construction
# Finishes are 32 Ra ID and OD
#
Seat Material available in Silicone, EPDM, and FKM.
# 13 Position Handle
!
Ball Valves
#
Available in ½” through 4”
# T316 construction
#
Finishes are 32 Ra ID
® #
Encapsulated seat and material is Teflon
#
Meets 3A and FDA requirements
# Locking handle is a standard
Specialty Products
WCB-Flow Products has extensive capabilities to manufacture products unique in design
and not standard to the marketplace. We have dedicated production cells and people
with years of experience to ensure your specifications are met. In today’s complex
marketplace, we have the versatility and knowledge to manufacture specialty
products for use in markets ranging from industrial to high purity.
! ! ! Drilling Bending (standard radius) Electropolishing
! ! unique tangents and Milling Passivation
configurations ! ! Extruding Nitron material identification
!
Welding ! ! Mitering Bar coding
! Polishing - Manual ! !
Cutting Special labeling and packaging
handcrafted or Automatic
All of these in-house capabilities sets us aside from others and gives us the total control
to ensure a quality product and on-time deliveries whatever the demand may be.
Internal acceptance criteria for the Off Angle characteristic is more than 60% tighter
than ASME published tolerances for improved fit and weldability of product.
SPX PROCESS EQUIPMENT
WCB-FLOW PRODUCTS
Butterfly & Ball Valves
Butterfly and ball valves are used in a wide variety of sanitary, industrial and
chemical applications. The versatility of these valves allows them to be used as an
on/off valve, and/or to throttle the flow of product. This valve offering covers low
and higher-pressure applications and can handle viscous or non-viscous products
depending on the valve selected.
! Butterfly Valves
#
Available in 1” through 4”
# T304 construction
# ID and OD finishes are 180 Grit or better.
#
Seat material available in Silicone, EPDM, and FKM.
# 13 Position Handle
!
Ball Valves
#
Available in ½” through 4”
# T316 construction
#
ID finishes are 180 Grit or better.
® #
Encapsulated seat and material is Teflon
#
Meets 3A and FDA requirements
# Locking handle is a standard
Specialty Products
WCB-Flow Products has extensive capabilities to manufacture products unique in design
and not standard to the marketplace. We have dedicated production cells and people
with years of experience to ensure your specifications are met. In today’s complex
marketplace, we have the versatility and knowledge to manufacture specialty
products for use in markets ranging from industrial to high purity.
! ! ! Drilling Bending (standard radius) Electropolishing
! ! unique tangents and Milling Passivation
configurations ! ! Extruding Niton material identification
!
Welding ! ! Mitering Bar coding
! Polishing - Manual ! !
Cutting Special labeling and packaging
handcrafted or Automatic
All of these in-house capabilities sets us aside from others and gives us the total control
to ensure a quality product and on-time deliveries whatever the demand may be.
Fittings produced by WCB-Flow Products are inspected during the manufacturing
process and again when completed to ensure all specifications are met.
WCBFP-901
Effective 12/04