Anco Eaglin A-E Cherry Burrell - Manual (Page 5)

5:8
Tube OD Weld Fittings
Tube OD weld fittings are utilized in a wide variety of industrial and
non-sanitary applications where corrosive environments are more
of a concern than sanitation. Utilizing these fittings ensures a
permanent, rigid, and chemical resistance process system.
!
Available in 1/2” through 12”
!
Fittings are made of T304 & T316L stainless steel.
! Unpolished tumble finish
BPE Fittings
These fittings are manufactured in accordance with stringent guidelines set
forth by ASME BPE standards. These stringent guidelines ensure the safety
of products used throughout the pharmaceutical and biotech industries.
These fittings are offered in either weld or S-Line Clamp.
! Available in ½” through 6”
! Fittings are made of T316L stainless steel. Other alloys available.
!
Finishes are available in any standard combination.
# ID polish 20 Ra (SSF1), 15 Ra EP (SSF4)
# BPE dimensionally compliant with ID polish 10 Ra Max EP
or Unpolished
# OD unpolished or polished to 32 Ra
! Electropolished fittings are available.
!
MTR (Material Test Reports)
# MTR provided with each shipment
# Online retrieval available
! Color-coded caps
!
Products packaged in resealable bags
! Meets ASME BPE requirements where applicable.
WCB-Flow Products offers 10 Ra maximum finishing capabilities in
accordance with tolerances and dimensions set forth by ASME-BPE specifications.