HOUNO Visual Cooking I BP - Manual (Page 4)

BP – ver. 1.30 – Sept. 2005
4
The yellow frame
indicates current step to
be changed. Press and
change to different
step.
Temperature down in
current step
The yellow frame
indicates current step to
be changed. Press and
change to different step.
Time down in current
step
Temperature up in
current step
Access to menu for
setting fan and exhaust
Time up in current step
Start program (A)
Main switch
If TIME, TEMPERATURE and MODE are OK, press (A). Program starts.
Note: Most programs have a PREHEATING or PRESTEAMING mode followed by STOP and
an alarm signal. This means that the products should not be loaded into the oven until this step
is completed and the alarm sounds. Open door – load oven – close door. the program continues
Regarding permanent changes to programs, see table of contents.
Start program
2 of 2
Access to menu for
setting of core temp.
(optional extra)