HOUNO CVC ovens - Manual (Page 11)

11
The functions of F1
With the function key F1, 10 functions are available.
* (1) Retrieve menu number
Press F1 once * (2) Store changed menu
* (3) Correct menu text
* (1) Store manual program
Press F1 twice * (2) Find vacant menu
* (3) Delete menu/step
Press F1 3 times * (1) Retrieve original menu
* (2) Contrast adjustment
* (3) Change pre-settings
* (4) Serial port
Retrieve menu number:
This function retrieves an existing menu number.
Store changed menu:
This function is used to store any changes that may have been made in one of the menus 1 - 199. A
program menu can be changed before, during or after its performance without affecting the original
menu.
If you wish to store a change permanently, use the function "Store changed menu" as follows:
Press F1 once, press 2 and conclude with ENTER-STEP.
Correct menu text:
This function offers the possibility of constructing or changing a menu heading.
Press F1 once, press 3 and by means of the keys 2, 4, 6 and 8, you can "write" in the display.
Visualise a cylinder with letters and figures which can be rolled forwards and backwards by
pressing keys 2 (forwards) and 8 (backwards).
With keys 4 and 6, the cursor can be moved to the right and to the left.
With key "7", you can change between capital letters and small letters.
With key "0", you can delete a character.
Conclude with ENTER-STEP.
Store manual program:
This function is used to set up a new menu.
Find vacant menu:
This function finds the first vacant menu. Press F1 twice, press 2 and the display shows a vacant
menu number. Conclude by pressing ENTER-STEP.
Delete menu/step:
With this function, you delete either the last step or the entire menu. Push F1 twice, press 3 and
conclude by pressing ENTER-STEP.