HOUNO CVC ovens - Manual (Page 14)

14
How to operate the CVC computer control
Starting up: The oven always starts in the manual menu with the HOT AIR mode automatically
selected.
MANUAL OPERATION
This function is activated by pressing ON/OFF. The control lamps change from red to green to
indicate that the function is active.
Changing operating mode, time, etc.
If another operating mode than HOT AIR
is required, this must be selected before selecting
time, temperature, etc. If not, these settings will be deleted by the settings of the new operating
mode.
Before starting or during program performance, you can change the time, temperature, core
temperature, exhaust and fan speed as you please.
Time, temperature and core temperature is selected by pressing the function key in question, and the
text in the display will flash. Changes can now be made by pressing the keys. Confirm with
ENTER-STEP
.
The exhaust is open when the control lamp is on . High fan speed is indicated by the upper
control lamp, low fan speed by the lower control lamp .
Timer
The oven has a timer function that can be used to count down the time when you preheat the oven
or for automatically starting a program.When the time runs out, an alarm will sound and the oven
will continue in the next step.
Activate the timer function in a manual operation mode by pressing the key for fan speed. The
display shows “Timer function” and you can set the time. Press ENTER-STEP and start
programming the desired functions as described under “Extending a program”, and press ON/OFF.
Extending a program
To extend a program by another step, press ENTER-STEP and the vacant step is ready for
programming.
In short:-
1. Choose one of the six function keys as step 1.
2. Adjust the values for time, temperature and core temperature, if necessary. Perhaps, change the
settings for fan and exhaust.
3. Proceed to the next step or start the oven program .