Nor-Lake General Purpose Lab Ref - Manual (Page 3)

4. Use a Phillips screwdriver to remove the screws on the top hinge.
5. Remove the top hinge from the cabinet and lift door off the lower hinge pin.
6. After the door is removed, remove the two screws from the bottom hinge.
7. Replace the door by reversing the above order.
MAINTENANCE
PERIODIC CLEANING
Disconnect the power supply before cleaning the refrigerator.
Beginning with the initial installation, the interior surfaces of the cabinet should be periodically
wiped down with a solution of warm water and baking soda (two tablespoons in one quart of warm
water). This solution will remove any odors from spillage that has occurred. The exterior of the
cabinet should also be cleaned frequently with warm water and a mild liquid detergent. Caution: Do
not use an abrasive or alkaline solution. Do not wash any removable parts in a dishwasher.
3
05/07 138706