Pulsafeeder Pulsar DLCM - Manual (Page 11)

5
5. Installation
5.1 Location
Review the Safety section prior to installing the DLCM. It contains information required to properly
install and operate the DLCM in an industrial environment.
The site selected for the installation of your DLCM is largely dependent on that of the PULSAR metering
pump. Review the PULSAR Installation Operation Maintenance Instruction Manual (Bulletin No. PMP-
IOM-96) provided with your PULSAR metering pump. It details system related issues that are important
to proper operation of the PULSAR metering pump. Consider the following DLCM related issues when
selecting a site. The DLCM should be mounted in an area where the operator has access to the front of
the unit and a clear view of the display panel and keyboard. Avoid locations where the DLCM would be
subjected to extreme cold or heat. Note the warning statement on the next page. The installation of this
device must comply with national, state and local codes.
Figure 1 – Typical Installation.