Vaddio DomeVIEW Outdoor Pendant Mount - Manual (Page 9)

Vaddio DomeVIEW Outdoor, Environment Pendant Mount Dome Installation and User Guide - Document 341-445 Rev C
Page 9 of 14
CAMERA CONTROL
For the DomeVIEW 50iR Outdoor Pendant Mount Dome and DomeVIEW 70 PTZ Outdoor Pendant Mount
Dome Systems, the RS-232 control programming information is in the technical manuals for the Sony EVI-
D70 and Canon VC-C50iR PTZ which can be found on the Vaddio website (
www.vaddio.com ) under the
TechNotes tab and under the PTZ Camera product grouping. Control system manufacturers’ also have
programs readily available for these cameras to be used with their control systems (i.e. Crestron® and
AMX®). Please contact those companies for the demo programs and for debugging of the programs that
they provide.
Both the DomeVIEW 50iR Outdoor Pendant and the DomeVIEW 70 Outdoor Pendant are shipped with IR
remote controllers for camera control. The camera base with the IR window is recessed inside the dome
enclosure and the acceptance angle of the IR control signaling is affected. The angle of acceptance for the
IR remote control is narrower and more directional. Please take this into account when controlling the
cameras with an IR remote.
For the DomeVIEW 50 IP Outdoor Pendant Mount Dome System, the Canon software provided with the
system controls the camera. The Canon VB-C50iR camera has a network server built-in and produces a
Motion-JPEG output. The software included is a single camera license. Additional Canon software is
available to monitor either 16 cameras (VK-16 software) or 64 cameras (VK-64) simultaneously. This
software is also available from Vaddio. Please see the June 7
th 2006 Price List for details.
RS-232 OUT to
next camera for
daisy chain
control
RS-232 on
Cat. 5e
1-1/2” NPT Pipe
(Not supplied)
DomeVIEW
Outdoor
Pendant
24 VAC Power Supply for heater/blower,
2-Cond. 18 AWG unshielded cable – 100’
(30.48m) Max distance
For cabling distances using the standard and optional power supplies for the
DomeVIEW 50iR and 70, see the previous page for additional information.
Figure 11:
Basic wiring diagram for cabling the DomeVIEW system