Vaddio WideSHOT WallVIEW Mini - Manual (Page 16)

WideSHOT WallVIEW Mini
WideSHOT WallVIEW Mini, Document Number 342-0710 Rev B Page 16 of 32
I NTERNAL W EB P AGES AND C ONTROL
The internal web pages will allow control of the Quick-Connect USB and control of the attached camera via a
network connection. These web pages will allow the user or administrator to set security passwords, change the
IP address, view diagnostics, access the firmware upgrade page and more!
Quick-Connect USB Web Pages Tour:
Screen Shot: Login
The QC-USB web server is intended as a user’s camera control page at one level, and an administrator’s
management tool at another level, which requires password authentication for access.
The Login Page will appear if there is a user name assigned by the administrator. Assigning a user name can
limit access to the admin menus by a general user. By default, the Username is blank and the password for the
user account is password. The administrator can set the name and password for the User account. If no user
name is assigned, the web page will automatically open to the camera control page when the USB streaming
mode is toggled to web server control mode. In web server mode, the video is switched off, so as mentioned
repetitively several times earlier, the IR SHOT Commander Remote is the best way to control the camera in real
time.
Screen Shot: Camera Control Page - No Camera Detected
The No Camera Detected window will appear if the Quick-Connect USB has no communication with the camera.
Check the camera power and serial connections if no camera is found within 30 seconds of initialization. The
USB Mini controls the camera over the serial connection.