Vaddio WideSHOT WallVIEW Mini - Manual (Page 30)

WideSHOT WallVIEW Mini
WideSHOT WallVIEW Mini, Document Number 342-0710 Rev B Page 30 of 32
W IDE SHOT OSD M ENU T REE
Main Menu Controls Range Default Notes
Picture > Brightness 0 - 16 8 Brightness
Contrast 0 - 16 8 Contrast
Sharpness 0 - 16 8 Detail (set Sharpness down to
3-4 to eliminate edge noise)
Black Level 0 - 16 8 Pedestal Adjustment
NR 0 - 16 0 Try values 4 to 8, depending
on lighting
Return Return to Main Menu
Color > Red Gain 0 - 16 8 Red Gain
Green Gain 0 - 16 8 Adjust Red and Blue levels
first
Blue Gain 0 - 16 8 Blue Gain
Saturation 0 - 16 12 Color Saturation
Return Return to Main Menu
Exposure > Shutter 0 - 16 8
AGC Low/Auto/High Auto Automatic Gain Control
Return Return to Main Menu
Special> Title Off/On Off Title for camera to display.
NTSC/PAL NTSC Don’t adjust this parameter.
Resolution and frequency are
set with the rotary selection
switch on the back of the
camera.
Defaults - - Sets camera back to defaults
Reset - - Completely resets camera
Version Date Code Firmware/Build Info
Return Return to Main Menu
Exit Exits OSD Mode
NOTE: When adjusting the defaults, the menu must be exited to save any changes. For example, to turn down
the Sharpness level:
1)
Touch the OSD button on the remote
2) Select Picture menu
3) Adjust Sharpness to three 3 or 4 (for a smoother video look)
4) Cursor down to Return (return to main menu)
5) Exit the Main Menu