Beijer Electronics iX TxA EN - Manual (Page 10)

TxA Maintenance
Detailed information about the options in the service menu is available in the iX
Developer help file, in the Service Menu chapter.
In addition to the descriptions in the iX Developer help file, the TxA service menu
also includes a Debug Logging option. Debug logging is used for service purposes.
Selecting this option makes it possible to enable/disable debug logging, and also
copying the debug log to a USB memory stick.
3.2 Hardware
This chapter describes how to maintain the TxA operator panel hardware. The
chapter includes general information, hardware tests and certificates, technical
data, a hardware replacement guide, and a fault tracing section.
Note:
Please refer to the Installation manual for technical details
3.2.1 General information
Before the operator panels are approved for market introduction, they are tested
by independent authorities. The TxA operator panels are examined by several
authorities before being approved for market introduction.
All operator panels are designed to fulfill CE, UL, and other standards.
The quality policy and environmental policy place demands on all suppliers and
subcontractors.
Beijer Electronics, MAEN021 10