Beijer Electronics T15BR EN - Manual (Page 15)

Chemical Resistance
4.2 Touch Screen and Overlay
4.2.1 Autoflex EB
Autoflex EB covers the overlay surrounding the screen.
Solvent Resistance
Autoflex EB withstands exposure of more than 24 hours duration under
DIN 42 115 Part 2 to the following chemicals without visible change:
Ajax / Vim in solution Downy / Lenor (1) Phosphoric acid (<30%)
Alkalicarbonate
solution
(1)
Ethanol Potassium ferricyanide
Ammonia (<40%) (1) Glycerine Potassium hydroxide (<30%)
Acetic acid (<50%) Glycol Pure Turpentine
Ariel powder in
solution
(1)
Gumption (1) SBP 60/95 (1)
Bleach (1) Hydrochloric acid (<36%) Sulfuric acid (<10%)
Castor oil Linseed oil Tomato ketchup
Caustic soda (<40%) (1) Methanol Trichloroacetic acid (<50%)
Cutting oil Nitric acid (<10%) White Spirit
Cyclohexanol Paraffin oil Windex (1)
Diacetone alcohol Persil powder in solution (1) Wisk
Diesel Petroleum spirit (1) -
(1) Extremely faint glossing of the texture was noted.
Autoflex EB withstands DIN 42 115 Part 2 exposure of up to 1 hour duration to
glacial acetic acid without visible change.
Autoflex EB is not resistant to high pressure steam at over 100 °C or the following
chemicals:
Concentrated mineral acids Benzyl alcohol
Concentrated caustic solution Methylene chloride
Dimethyl formamide Tetrahydrofuran
Beijer Electronics, MAEN165 15