Beijer Electronics MTe Nautic EN - Manual (Page 16)

Description of Parts
16 Beijer Electronics, MAEN983B
5.2 Assembly
A free space of 100 mm, for air circulation, has to be provided around the appli-
ance, to dissipate the heat generated during operation.
The monitor is assembled with hexagon nuts (included in the supplied mount-
ing kit).
5.3 Power Supply
The MTe Nautic monitors are available with 230 V AC or 24 V DC power sys-
tem.
The power supply for 24 V DC is carried out via a double-pole connector
(Phoenix MST BT 2,5/2).
The monitors are certified for the connection to protective grounded power sup-
ply according to EN60950. The controlling transformer has to comply with
EN60742.
Note:
Possible risk of damage to the appliance!
Protection class IP65 for the front panel is only guaranteed with a perfect fitting seal.
Pay attention to the torque when fixing the front panel.
Note:
Check the power supply system with the relevant data on the type plate.