Beijer Electronics MTe Nautic EN - Manual (Page 2)

Foreword
Beijer Electronics, MAEN983B
MTe Nautic Monitor Series Installation Manual
Foreword
The MTe Nautic Monitor series affords excellent quality displays of nautical
charts or machine data. The series operates with or without touch, features non-
reflective glass for easy daylight viewing and offers infinitely adjustable dimming
to zero while delivering the specific functions to enable automation and naviga-
tional tasks.
Dimming can be carried out by buttons on the front, or remotely via a serial,
USB or optionally via a LAN port.
Video out signal is available through VGA, DVI, USB or optionally via LAN.
With shallow depth for easy installation, the MTe Nautic can be utilized in
combination with the EPC-box Nautic or third party computers. All models are
fully certified according to all major nautical classification societies.
This manual describes each model and gives instructions on installation, opera-
tion and service.
© Beijer Electronics AB, MAEN983B, 2010-08
Please read the entire installation manual prior to installing and using this equipment. Only qualified
personnel may install, operate or repair this equipment. Beijer Electronics AB, including all its group
companies is not responsible for modified, altered or renovated equipment. Because the equipment has a
wide range of applications, users must acquire the appropriate knowledge to use the equipment properly
in their specific applications.
Persons responsible for the application and the equipment must themselves ensure that each application
is in compliance with all relevant requirements, standards and legislation in respect to configuration and
safety. Only parts and accessories manufactured according to specifications set by Beijer Electronics AB
may be used.
BEIJER ELECTRONICS AB, INCLUDING ALL ITS GROUP COMPANIES, SHALL NOT BE
LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE OR REPAIR OF THIS
EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S
SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE
PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE DIS-
CRETION OF BEIJER ELECTRONICS AB.