Beijer Electronics M70 EN - Manual (Page 28)

Technical Data
28 Beijer Electronics, MAEN843A
Cable specifications of CABTTxxx connection cable
When planning the power supply, take into account the voltage drop on the
M70 connection cable.
Parameter CABTTxxx
Specification of power
supply lines in CABTTxxx Cross section: AWG24 (0.24mm²)
Material: zinc-coated copper strand
Line resistance:= 90 Ohm/km (= 145 Ohm/mile)
Nominal supply voltage
directly on the handheld
panel (without CABTTxxx) +24 V DC (fully operational in the range: 19.2 - 30 V
DC).
Maximum interruption
time of supply voltage ≤ 10 ms (lt. IEC 61131)