Hawk Industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 - Manual (Page 6)

Warranty
HAWKJAW 65K-ALS & 100K-ALS
STANDARD WARRANTY AND FIELD SERVICE
Your Hawkjaw must be free of material and workmanship defects for a period of six months from the date
of delivery. If any items fail because of a manufacturing defect within that period of time, that item will be
replaced by Hawk Industries. Hawk Industries at its discretion may extend this warranty period.
Replacement of parts will be accomplished either at the factory or at a designated service point. This
guarantee does not include the replacement of parts where failure occurred due to normal wear and tear or
misuse of the tool. Defective parts must be inspected by Hawk Industries, at its Long Beach plant, before
warranty can be honored. Customer must obtain an RGA# (Return of Goods Authorization) from the
California, USA factory.
Hawk Industries' liability is limited to replacement of defective parts only and does not include the cost of
labor, communications, transportation or handling connected with the replacement of such parts.
Hawk Industries will in no event be liable for consequential damages or contingent liabilities arising out
of the failure of any parts to operate properly.
No expressed, implied or statutory guarantee other than herein set forth is made or authorized to be
made by Hawk Industries.
Factory specifications for hydraulics, pneumatics, lubricants, adjustments and safety precautions as set
forth in the operation and maintenance manual are for the mutual protection of the owner of the HawkJaw
65K-ALS or 100K-ALS and the company. Failure to adhere to these specifications can reduce the
efficiency or life of the equipment and/or cause bodily injury.
CAUTION
6 Warranty
The Hawkjaw includes specially modified valves, fasteners and other components for extreme environ-
ments and service. Any attempt to substitute standard components could reduce reliability and perfor-
mance, void the warranty and/or cause bodily injury.
Warning