MIPRO ACT-101 IR Remote-Controlled Single-Channel Diversity Receiver - Manual (Page 8)

MIC/LINE Switch: Microphone/Line Switch.
Volume Control: Volume level adjustment.
Transmitter Power Indicator: Determines current battery power level.
22
23
24
25
RECHARGEABLE MULTI-FUNCTION TRANSMITTER MICROPHONE
LINE- For electric guitar.
MIC- For general condenser lavalier/headworn microphone or wired microphone.
!Normal Battery: Indicator illuminates and dims when turned on.
!Low Battery: Indicator stays illuminate when turned on. Recharge immediately.
! Drained Battery: Indicator does not illuminate when turned on. Recharge
immediately.
! No Battery or Installed Incorrectly: Indicator does not illuminate when turned on.
! Different Frequency Band: Indicator flashes 4~5 times.
Transmitter Power Switch: Power ON to speak or amplification. The RF indicator
on the receiver illuminates to denote it has received signals. Make sure transmitter is
OFF position when not in use or during charging.
! The infrared (IR) has an approx. 15-degree trajectory angle for optimal reception.
! The optimal operating range of the infrared remote control is approx. 3-meter/10-feet.
! Press and hold the ACT button towards the ACT Port (2 or 14) of the receiver for at
least 1 second. Ascertain ACT Port Indicator Switch or Power Indicator illuminates
before moving away.
! If ACT Port Indicator Switch or Power Indicator illuminates and dims it denotes IR
reception was not received successfully. Repeat above steps until indicator illuminates.
TIPS IN OPERATING INFRARED REMOTE CONTROL
Power On & Off Operation:
1
18
13 1
13
Wireless IR Remote Control Receiver
10 11
Side View
22
23
24
25
O F F
O N L IN
E
M IC