MIPRO ACT-311 Single-Channel Diversity Receiver - Manual (Page 10)

Instructions:
1. Press and release the 'SET' button until both cursor and channel number start
to blink denoting it is ready to accept parameter changes.
2. During blinking, press and release ▼ or ▲ button to autoscan and autostop for a
clear, interference-free preset channels.
or
GROUP 1~6 and GROUP 11:
During blinking, press and hold ▼ or ▲ button to stop one of the 8 factory preset
channels.
GROUP 7~10:
During blinking, press and hold ▼ or ▲ button to stop one of the 16 factory preset
channels.
3. EU/ISM 863-865MHz Band: In Group 1, during blinking, press and release ▼ or ▲
button to autoscan and autostop for a clear, interference-free preset compatible
channels.
4. Press the ‘SET' button to confirm the change.
To exit mode:
CH mode deactivates if ▼ or ▲ button is not pressed within 5 seconds and LCD
screen dims if not pressed in 10 seconds.
!
CHANNEL Setting
Press Down Up
SET
SET
Instructions:
1. Press and release the 'SET' button until both cursor and group number start to
blink denoting it is ready to accept parameter changes.
2. During blinking, press ▼ or ▲ button to one of the 10 factory preset groups.
3. EU/ISM 863-865MHz Band: During blinking, press ▼ or ▲ button to one of the 2
factory preset groups. Group 1 has 4 preset compatible channels. Group 2 has the
user-defined channels.
4. Press the 'SET' button to confirm the change.
To exit mode:
GRP mode deactivates if ▼ or ▲ button is not pressed within 5 seconds and LCD
screen dims if not pressed in 10 seconds.
!
GROUP Setting
Press Down Up
SET
SET
14 15
Diversity Wireless Systems Diversity Wireless Systems