MIPRO ACT-311 Single-Channel Diversity Receiver - Manual (Page 13)

Battery Status:
The battery meter is lit when the transmitter is powered on. The battery meter
gives a percentage (%) indication of remaining battery life, as shown. Replace with
new, fresh batteries when battery indicators fall to 10% (1 indicator remaining).
The BA battery cursor starts blinking when transmitter is powered-on and signal is
received. After 3~5 seconds, the cursor will stop blinking and accurate battery level
will be displayed.
!
!
100% 90% 80% 40% 10% 0%
BA: Transmitter Battery Level Dimming & Lit Display Mode
The receiver LCD screen will dim automatically if no transmitting signals are
received or ‘SET’ ‘ACT’ button is not pressed within 5 seconds.
Lit LCD Screen Continuously:
Press and hold ▲ button for approx. 2 seconds will force the screen to be lit
continuously.
Cancel Lit LCD Screen Continuously:
Press and hold ▲ button for approx. 2 seconds will cancel it.
!
!
!
ACT SET
20 21
Diversity Wireless Systems Diversity Wireless Systems