MIPRO ACT-311 Single-Channel Diversity Receiver - Manual (Page 12)

Instructions:
The purpose of Lock function is to lock and prevent accidental changing of settings.
To Lock setting:
Press and hold the 'SET' button for approximately 3 seconds until the Lock icon
appears.
To Unlock setting:
Press and hold the 'SET' button for approximately 3 seconds until the Lock icon
disappears.
!
!
!
LOCK Setting
Press
SET
SET
SQ SQUELCH Setting
Press Down Up
Instructions:
1. Press and release the ‘SET' button until cursor starts to blink denoting it is
ready to accept parameter changes.
2. During blinking, press and release ▼ or ▲ button to decrease or increase the
squelch level.
3. Press the ‘SET' button to confirm the change.
WARNINGS:
! Decreased SQ level setting has higher sensitivity level resulting in longer, maximize
reception range.
! Increased SQ level setting has lower sensitivity level resulting in shorter, limited
reception range.
To exit mode:
! SQ mode deactivates if any button is not pressed within 5 seconds and LCD screen
dims if not pressed in 10 seconds.
SQ
SQ
SET
SET
18 19
Diversity Wireless Systems Diversity Wireless Systems