MIPRO ACT-32TC Rechargeable Bodypack Transmitter - Manual (Page 3)

MUTE Button: To mute and un-mute the audio
signal temporary.
Antenna: Flexible 1/ 4 wave transmitting
antenna.
Transmitter Housing: Holds PCB board and
wires.
LCD Panel: Display transmitter parameters.
SET Button: Parameter selection button.
MODE Button: Allows access to available
functions displaying in LCD panel.
ACT IR Port: Align and syncs the transmitter
and receiver frequency automatically.
Power Button: Press and hold 2 seconds to
power ON or OFF.
Battery Circuitry Protection Reset Button
Battery Compartment: Accommodates one
18500 rechargeable battery.
Battery Cover: Hinged cover opens to provide
access to one 18500 rechargeable battery.
External Mute Connector: When an external
mute switch cable, MJ-70 (optional) is connected
, user can manually mute and un-mute the
audio temporary.
Belt Clip: Detachable and reversible design
allows the transmitter to be worn on a belt,
waistband, or guitar strap ( .
Battery Charging Contact: Align contacts
during charging.
Figure 1)
4
5
6
7
8
9
10
11
12
13
14
15
3
2
2 3
(Figure 1)
(Positive Wear)
(Opposite Wear)
Operating Instructions
!
!
Insert the lavalier, headset microphone or
instrument cable into the audio input connector
before power ON the transmitter.
Tighten the connector screw clockwise direction
as shown in (Figure 2) for a secured fit.
(Figure 2)
The ridge on the
connector must align and
match the indentation on
the socket when inserting
for a proper fit.
Capsule Connector
Headset
Lavalier
ON MODE SET
Rechargeable Bodypack Transmitter Rechargeable Bodypack Transmitter