MIPRO ACT-52T Bodypack Transmitter - Manual (Page 3)

Antenna: Flexible 1/4 wave transmitting
antenna.
Transmitter Housing: Holds PCB board and
wires.
LCD Panel: Display transmitter parameters.
SET Button: Parameter selection button.
MODE Button: Allows access to 6 available
functions displaying in LCD panel.
Power Button: Press and hold 2 seconds to
power ON or OFF.
ACT IR Port: Align and syncs the transmitter
and receiver frequency automatically.
Battery Compartment: Holds 2 'AA' batteries.
Battery Cover: Hinged cover opens to provide
access to 2 'AA' batteries.
External Mute Connector: When an external
mute switch cable, MJ-70 (optional) is
connected, user can manually mute and un-
mute the audio temporary.
Belt Clip: Detachable and reversible design
allows the transmitter to be worn on a belt,
waistband, or guitar strap ( . Figure 1)
Operating Instructions
(Figure 2)
!
!
Insert the lavalier, headset microphone or
instrument cable into the audio input connector
before power ON the transmitter.
Tighten the connector screw clockwise direction
as shown in (Figure 2) for a secured fit.
The ridge on the
connector must align and
match the indentation on
the socket when inserting
for a proper fit.
Capsule Connector
Headset
Lavalier
4
5
6
7
8
9
10
11
12
13
3
(Figure 1)
2 3
Bodypack Transmitter Bodypack Transmitter
(Positive Wear)
(Opposite Wear)