MIPRO ACT-52T Bodypack Transmitter - Manual (Page 8)

12 13
Bodypack Transmitter Bodypack Transmitter
E
A
D
B C
MUTE Control Set-Up
MUTE control enables audio to be muted or
un-muted temporarily.
Press MUTE button to mute audio temporarily.
Parameter values can be changed and ACT sync
activate during this MUTE mode.
Press MUTE button to un-mute.
!
!
MUTE
AF MUTE
AF INPUT
F
Battery Status
Indicates the power remaining in the transmitter
battery. When the battery has less than 10% power
remaining it must be replaced or recharged. If an
under voltage condition continues, the LCD will
show “OFF...” and the system will shut down to
prevent being overly discharged.
100% 80% 60% 40% 20% 10%
OFF...
Power Button
“OFF...” - Power Off
! When the power switch is turned off, the LCD
will show “OFF...” (for Power Off) first and then
the system will shut down and no further
messages will be displayed.
! Press and hold for 2 seconds to power on & off.
AF MUTE AF MUTE AF MUTE
802.000
MHz
FREQUENCY
0 dB
AF GAIN
AF MUTE
RF-LOW
RF POWER
MODE MODE MODE
UNLOCK
SET LOCK
AF MUTE AF MUTE
MANUAL
MUTE MODE
MODE MODE
07 03
GRP CH
MODE