MIPRO ACT-52T Bodypack Transmitter - Manual (Page 5)

! Group & Channel and Frequency are factory
pre-set, thus, its parameter values are displayed
after it is ACT synced. Values cannot be
changed.
Setting Input Sensitivity Level
( ) Group and Channel
( ) Frequency
07 03
CH GRP
802.000
MHz
FREQUENCY
6 7
Bodypack Transmitter Bodypack Transmitter
! Selectable between 12dB to -18dB
with 6dB parameter up or down selection.
! Press MODE button until mode
appears.
! Press SET button once to activate function.
! Press SET button to select the desired
sensitivity level.
! Press MODE button to confirm and save the
change.
! The higher the sensitivity level, the lower the
dynamic range of input signals. Meanwhile noise
will increase, and the feedback problem will be
getting more serious.
NOTE:
! Guitar setting is recommended at -12dB
level.
! The audio gain level is factory preset at 0dB
level.
AF GAIN
AF GAIN
0 dB
AF GAIN
6 dB
AF GAIN
12 dB
AF GAIN
0 dB -6 dB
AF GAIN AF GAIN
6 dB
AF GAIN
-12 dB
AF GAIN
-18 dB
AF GAIN
-12 dB
AF GAIN
-6 dB
AF GAIN
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET