Team Associated RC10 - Manual (Page 2)

2
:: Introduction
:: KIT Features
:: Additional
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC10 Worlds Car Kit. Please take a moment to read through this manual to help familiarize yourself with
these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.
Features in the RC10 Worlds Car Kit:
• Black hard anodized 6061-T6 machined aluminum monocoque chassis
• Stealth 3-gear transmission with ball differential
• V2 slipper assembly with molded gear cover
• 16 precision ball bearings included
• Turbo Mirage body, 5.5” wing, and replica vintage decals
• V2 threaded hard anodized 6061-T6 aluminum coilover shocks with molded bleeder caps
• Independent suspension with durable long front arms and refined geometry
• In-line aluminum front axles and 30 degree caster blocks
• Fiber composite shock towers and battery strap
• Graphite transmission brace
• Updated CVA axle drivetrain
• World’s Car bellcrank steering
• 2.2” one-piece wheels
• Steel turnbuckles
Your new RC10 Worlds Kit comes as a kit. There are some items you
will need to complete your kit (refer to catalog for suggestions):
• R/C two channel surface frequency radio system
• Electronic Speed Control (ESC) • R/C Electric Motor
• Steering Servo
• Tires with inserts
• 2S, 7.4V Lipo stick battery or 7.2V NiMH battery
• Peak detection battery charger • Thread Lock (AE # 1596)
• #2 Bit Type Phillips Screw Driver • Polycarbonate specific paint
• Pinion gear, size to be determined by type and wind of motor you use
Tools included:
• Allen wrenches (AE # 6950)
(.050”, 1/16”, 3/32”, 5/64”)
• Molded tools (AE # 6956)
• Camber gauge (AE # 1719)
• Silicone Shock Fluid (Refer to catalog for complete listings) • Tire Adhesive (AE # 1597)
• Body Scissors (AE # 1737) • Reamer / Hole Punch • Wire Cutters • Hobby Knife
• FT Hex Wrenches (AE # 1655) • Needle Nose Pliers • Multi Tool (AE # 7494)
• Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE # 1105)