Meteor ProMover 575 - Manual (Page 4)

4
USER MANUAL:
ProMover 575
DMX-Scanner - Yoke Fixture
Keep this manual for future needs! Put it in a place that you can access it if needed.
Table of contents:
INTRODUCTION: ………………………………….…………… 2
SAFETY INSTRUCTIONS: …………………………… 2
OPERATING DETERMINATIONS: …………………. 3
USER MANUAL INSTRUCTIONS: …………………. 4
DESCRIPTION OF THE DEVICE: ……………………………
FEATURES: ……………………………………………. 5
OVERVIEW
INSTALLATION : ……………………………………………….
5
Installing/Replacing the lamp: …………………………. 5
Lamp adjustment: ……………………………………….. 6
Overhead Rigging:……………………………………….. 6
Master/Slave operation : ………………………………... 7
DMX-512 connection / connection between Fixtures: .. 7
Connection with the mains: …………………………….. 7
OPERATION ............................................................………
Stand Alone operation................................................ 8
DMX-controlled operation ..............................…........ 8
Addressing .................................................................. 8
DMX-Protocol.............................................................……… 9
ProMover 575 – channel features: ……………………. 10
Setting DMX Channel / Stand-alone LCD: …………… 10
CLEANING AND MAINTENANCE: ....................................... 11
Replacing the fuse ....................................................... 12
TECHNICAL SPECIFICATIONS:
Power supply: 115 V AC, 60 Hz ~ 500 W 6
Power consumption: 800w
DMX-control-channels: 14 channels
DMX-512-connection: 3-pin XLR
Sound-control: via built-in microphone
Strobe Flash-rate: (1-10 flashes/sec.) via shutter
Number of colors: 16 dichroic + white +RAINBOW effect
Number of gobos: 14 rotating gobos and open + rainbow scrolling
Dimensions: 16L x 13w x 20h (500 x 485 x 615 mm)
Weight: 62 lbs. (24kg). Boxed weight: 71lbs
Maximum ambient temperature (ta): 45° C
Maximum housing temperature (tB) (steady state): 60° C
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object: 0.5 m
Fuse: 10 amp
Fitting lamp: HMI 575