Meteor C240 F Controller - Manual (Page 4)

2. Use the BANK Up and Down to locate the bank that has
a. that particular scene in it.
3. Select the desired SCENE you want to copy by pressing the
SCENE Button.
4. Use the BANK buttons UP and DOWN to select the Bank
where you want the to store the copied SCENE.
5. Press MIDI / Add button followed by the SCENE button where
you want to copy to.
3. SCENE DELETE:
This function will rest all the DMX channels incorporated
within a SCENE to a DMX value of 0.
1) Select the desired SCENE you would like to delete.
2) While Pressing and Holding AUTO / Del. Press the SCENE
button (1 – 8) you want to delete.
3. ERASE ALL SCENE:
This will ERASE all SCENES in ALL BANKS. All SCENES
are reset to DMX value zero (0). Make double sure this is
really what you are wanting to do
1) Press and hold down PROGRAM and BANK Down buttons
while turning power off.
2) Re-connect POWER. All SCENES should be erased.
NOTE: Once you have successfully erased all SCENES, there is no way
to retrieve them.
3. COPY A BANK :
This function enables you to copy the setting of one BANK
to another BANK.
1) Press and HOLD the PROGRAM Button for 3 seconds to
activate the PROGRAMMING Mode.
2) Select the BANK you want to copy.
3) Press and Release the MIDI / Add button.
4) Select the BANK into which you want to copy to.
5) Press the MUSIC / BANK-Copy Button. The LCD Display
will flash momentarily to indicate the process / copy has
been completed.
(6)
3 DELETE A BANK:
1) Press and HOLD the PROGRAM Button for 3 seconds to
Activate the PROGRAM Mode.
2) Select the BANK to be deleted.. Press AUTO / Del and
MUSIC / Bank Copy at the same time to delete the BANK.
The LCD will flash momentarily to indicate it has been
successfully deleted.
3
CHASE PROGRAMMING:
You must already have programmed SCENES before you
can program any chases.
1) Press and HOLD the PROGRAM Button down for three (3)
seconds to enter the PROGRAMMING MODE
2) Choose any CHASE ( 1 – 6 ) to be programmed.
3) Select the desired SCENE from any of the BANKS.
SCENES run in the same order as they are entered into the
PROGRAM CHASE.
4) Pre the MIDI / Add Button. All the LED’s will FLASH three
(3) times.
5) Repeat steps 3 and 4 as many times as you want. You can
record up to 240 SCENES in one CHASE.
6) When you are finished PROGRAMMING a CHASE –
PRESS and HOLD the PROGRAM Button for three (3)
seconds.
3 COPY A BANK TO A CHASE:
1. Press and HOLD the PROGRAM Button for three (3)
Seconds to enter the Programming Mode.
2. Select the BANK of SCENES you wish to copy.
3. Select the CHASE to which you want to copy the bank
of SCENES. Press the MUSIC / BANK-Copy Button.
The LCD Display will flash momentarily to indicate the
process / copy has been completed.
4. Press MUSIC / Bank-Copy and MIDI / Add at the same
time. The SCENES of the BANK are now copied into
the CHASE.
5. Press and HOLD the PROGRAM Button for three (3)
seconds to exit the Programming Mode.