Meteor C240 F Controller - Manual (Page 5)

3 EDITING CHASES:
This feature allows you to add / delete SCENES from an
already existing CHASE.
1) Press and HOLD the PROGRAM Button down for three (3)
Seconds to enter the Programming Mode.
2) Select the CHASE (1-6) to which you want to add a step.
3) Press TAPSYNC / Display and the LCD shows the
SCENE and the BANK. That is the BANK containing the
SCENE you want to add to the CHASE.
4) Press TAPSYNC / Display again and the LCD shows the
CHASE that you have selected to add to.
5) Use the UP or DOWN Buttons to scroll through the CHASE
to reach the step AFTER which you wish to add.
6) Press MIDI / Add – the LCD will read one step number
higher.
7) Press the SCENE Button you wish to add.
8) Press the MIDI / Add again to add the new step.
9) Press and HOLD the PROGRAM Button down for three (3)
seconds to exit the Programming Mode.
3
DELETING A STEP OR TWO IN A CHASE:
1) Press and HOLD the PROGRAM Button for three (3)
Seconds to enter the Programming Mode.
2) Select the CHASE (1-6) from which you want to delete a
step (scene).
3) Press TAPSYNC / Display and the LCD shows the
CHASE you have selected.
4) Use the UP and Down Buttons to scroll through the
CHASE to reach the step (scene) you want to delete.
5) Press AUTO / Del and the SCENE will be deleted.
6) Press and HOLD the PROGRAM Button for three (3)
seconds to exit the Programming Mode.
3 DELETE CHASE ( all SCENES still available)
1) Press and HOLD down the BANK Down and AUTO / Del.
while turning power off.
2) Reconnect the Power and the CHASES should all be
deleted
(8)
3
RUNNING SCENES:
MANUAL RUN SCENES
1) When the power is first turned on, the unit is in a MANUAL
Scene mode.
2) If in the Program Mode – Press and Hold the PROGRAM
Button for three (3) seconds. The Program LED will go out.
The SCENEMASTER is now in its MANAUL Mode.
3) Be Sure that the AUTO and MUSIC Button LED’s are off.
4) Select the BANK – using the UP or DOWN Button that
stores the SCENES you want to run.
5) Press the SCENE Button to run the SCENE you have
selected.
3
RUNNING SCENES:
AUTO RUN SCENES:
This function will run a BANK of PROGRAMMED
SCENES in a sequential loop.
1) Press AUTO / Del once to activate the AUTO RUN mode.
2) Use the UP or DOWN BANK Button to select a Bank of
SCENES to run.
3) Now you can use the SPEED and FADE sliders to adjust
the SCENES to your liking
NOTE: The FADE setting should never be slower then the
SPEED setting or the SCENES will not be completed.
4) You can change the BANKS “on the fly” by pressing the
UP or DOWN BANK Buttons.
3
RUNNING SCENES:
MUSIC RUN SCENES
1) Press the MUSIC / Bank-Copy Button and the
Corresponding indicator light will come on in the LCD.
2) Select the desired BANK that stores the SCENES you
want to CHASE by using the UP or DOWN Button
3
RUNNING SCENES:
MIDI RUN SCENES
1) Select BANK to run SCENES using MIDI – in MANUAL /
Auto or MUSIC Run Mode.