Meteor C240 F Controller - Manual (Page 7)

TROUBLE SHOOTING / OFTEN ASKED QUESTIONS:
COLORS DON’T RESPOND WHEN FADERS ARE MOVE
MAKE SURE DMX ADDRESS IS CORRECT / DIP SWITCHES
IF XLR CABLE IS MORE THEN 30 METERS (100FT), CHECK
TO SEE IF TERMINATED CORRECTLY.
MIRRORS DON’T RESPOND WHEN SLIDERS ARE MOVED
MAKE SURE DMX ADDRESS IS CORRECT / DIP SWITCHES
MAKE SURE SPEED IS ADJUSTED, IF AVAILABLE FOR
FASTER MIRROR MOVEMENT. NOT ALL UNITS HAVE
SPEED ADJUSTMENT
IF XLR CABLE IS MORE THEN 30 METERS (100FT), CHECK
TO SEE IF TERMINATED CORRECTLY.
SCENES DON’T RUN AFTER RECORDING THEM
MAKE SURE TO PRESS MIDI / ADD BUTTON BEFORE
PRESSING SCENE BUTTON. LED’s SHOULD FLASH
AFTER PRESSING EACH SCENE BUTTON.
BE SURE YOU ARE IN THE CORRECT BANK THAT THE
SCENES WERE RECORDED IN.
SCENES DON’T RUN CORRECTLY AS RECORDED
MAKE SURE ALL FIXTURES WERE RECORDED IN SCENE
MAKE SURE YOU ARE IN THE CORRECT BANK THAT THE
SCENES WERE RECORDED IN
CHASES DON’T RUN AFTER RECORDING THEM
MAKE SURE TO PRESS THE MIDI/ADD BUTTON AFTER
PRESSING THE SCENE BUTTON. LED SHOULD FLASH
AFTER PRESSING MIDI / ADD.
BE SURE YOU ARE IN THE CORRECT CHASE THAT HAS
THE STEPS RECORDED IN
IF IN AUTO MODE – DID YOU ADJUST SPEED AFTER
SELECTING AUTO
FADE TIME IS TOO LONG FOR SPEED SELECTED
FIXTURES AREN’T DOING ANYTHING
HAVE YOU READ THIS MANUAL COMPLETELY AND
FOLLOWED ALL THE RECORDING STEPS FOR
SCENES AND CHASES
DID YOU SET YOUR DIP SWITCHES ACCORDING TO THIS
MANUAL
ARE ALL UNITS PROPERLY CONNECTED WITH POWER
ON AND PROPERLY CONNECTED VIA DMX.
EC DECLARATION OF CONFORMITY: We declare that this product complies with the following
specifications and bears CE mark in accordance with the provisions of Electro- Magnetic
Compatibility (EMC) Directive 89/336/EEC EN55014-1:1994, EN61000-3-2:1995, EN61000-3-
3:1995EN55014-2:1997CATEGORY ll EN61000-4-2:1995, EN61000-4-3:1995, EN61000-4-
4:1995EN61000-4-5:1995, EN61000-4-6:1995, EN61000-4-11:1994HARMONIZED STANDARD
EN60598-1:1993 Safety of Household and similar electrical appliances Par 1: General
Requirements Following the provisions of the Low voltage Directive 73/23 EEC and 93/68/EEC
FOR TECHNICAL HELP / SUPPORT
MLSC Inc. MLSC Inc. MLSC Inc. MLSC Inc.
8000 Madison Pike, Madison, Alabama 35758
Tel (256) 461–8000 Fax: (256) 461–7708
Website: meteor-global.com e-mail: [email protected]