Magikitch'n NPG-60 - Manual (Page 11)

L25-011 Rev 1 (05/11)
9
7. BURNER & ORIFICE INSPECTION
A. Remove the service shelf by removing the two screws at the ends (29).
B. Slide service shelf (30) forward and then lift it off the unit.
C. The front of the burners, the valve bodies, and orifices are now exposed for inspection. Looking
down into the unit, compare these components with the diagram above (Figure 3).
D. If the components ARE NOT aligned as shown in the diagram, DISCONTINUE USE and contact the
manufacturer.
E. If they appear as in the diagram, carefully replace the service shelf and re-insert the screws. Your
unit is ready for use.
Figure 4
8. OPTIONS
Some optional accessories for your MagiCater Gas Charbroiler include:
• Stainless Steel Service Shelf — Durable, smooth working surface; matches the optional SS trim kit.
• MagiGriddle — Heavy polished steel griddle for cooking breakfasts, sautéing, etc.
• Steamer Set — Holds full-size hotel pans for steaming and warming.
• Cutting Board —Full length custom fitted Richlite cutting board fits over the service shelf.
• Split Hood — Twin roll-up hoods keeps heat in for roasting and broiling.
• Windguard — Keeps grill firing properly in windy conditions.
• Stainless Steel Trim Kit — For a sleek appearance and easy cleaning exterior.
• Slip-on Stainless Steel Service Shelf — Adds another full-size worktop space at the back.
• Heavy Duty Top Grid — For serious cooking workloads.
• Waterproof Slipcover — Durable custom fit cover that protects against dirt and weather damage.