Minka Group F702-VB - Manual (Page 12)

I
NSTALLING THE
L
IGHT
B
ULB
& G
LASS
S
HADE
10.
WARNING: Shut of the power supply
before removing or replacing lamp. In
handling of halogen bulb, care should be
taken not to touch it with your bare
hands. Oil residue will shorten the life of
the halogen bulb. If you accidentally
come into contact, wipe thoroughly
with a clean, lint-free, cotton cloth.
Allow the bulb to cool off for 10
minutes before changing the bulb. Use
light bulb in accordance with the fan's
specification. TO REDUCE THE
RISK OF FIRE DO NOT EXCEED
MAXIMUM WATTAGE RATING.
Step 1. Install 2x50W halogen bulb
by screwing it clockwise into bulb
socket (Fig. 21).
Step 2. Raise the glass shade up
against the light plate and secure it to
the fan with the light kit stem. (Fig.
21)
Fig. 21
Bulb
socket
Light kit stem
Glass shade
Light plate
Light kit stem
50 W halogen bulb