Martin Universal Design U-DS1776R - Liberty Drawing Table - Manual (Page 4)

Assembly
Since 1853
STEP 1
Begin assembly of Liberty table by taking
each base (part 1) and slide parts 2 & 3 over
the upright column of part 1. Secure with
one knob by tightening clockwise to each
assembled base leg (part J). See Fig 1
Part 3
Part 2
J
FIG 1
Zoom of
Knob
attachment
STEP 2
Continue by attaching the top support
(part 4) to the [2] base leg assemblies. Have
one person hold one end of Part 4 while the
other person attaches Part 4 part to the base
legs.
Using 2 ea. part E bolts, insert these into the
2 holes found on the top edge of parts 2 &3
and into the 2 holes on the ends of part 4.
Secure and tighten with 2 ea. Nuts (part H).
See FIG 2.
Repeat with other side
FIG 2
Zoom of Part 4
attachment
4
4
E
H
NOTE:
We reccommend the
The Assembly of this table to be
performed with two adult people.
August 08, RPI