Wildgame Innovations PD1 - Manual (Page 4)

Setting Feed Time:
1. Once you have set the current time, then use the ▲
or ▼ buttons from “READY” mode to enter the appro-
priate feeding ( Feed.1 thru Feed.6). Once you have
reached the proper feeding, press the Program button
to enter the feed time and use the instructions from
SET TIME to enter the desired feed time, or to set in
the “OFF” position.
Programming
Setting Motor Run Duration:
1. After setting the hour and minutes, press the
Program button again and use the + or - buttons to set
run time duration (adjust from 0 to 90 seconds per feed
time).
2.Press the Program button again and use the ▲ or ▼
buttons to enter the next feeding (up to 6). After you
have completed your programming, wait 10 seconds to
go back to “READY” mode automatically.
Programming