Avaya P117F(R) - Manual (Page 19)

Chapter 3 Configuration
Parameter configuration
The following sections provide step-by-step instructions for configuring each
parameter.
In many module configuration menus, the following parameters are displayed:
• Display Current Version shows the active configuration.
• Display Configured Version shows the new configuration which will
take effect after a reset has been made.
• Display Default Version shows the system default configuration.
<CR> — Refresh The Screen
Type Enter to clear the screen and re-display the current displayed Menu with the
updated parameters.
1 — Reset the Module
If you have changed certain parameters of the P117F(R), the P110 NMA or other
switches in the stack, you must reset the agent before you exit the Setup session.
The following lists the resets you must initiate and the resets performed
automatically by the agent.
Resets the user must initiate Resets performed automatically
by the agent
After setting ATM port
parameters to their default
values The first time you set VLANs
Change in the “Use switch”
or any other DIP switch of
any other switch Set Ethernet ports’ parameters to
their default values
After changing the LSV DIP
Switch position
Resetting does not affect any other parameters. You will be asked to confirm the
reset before it is executed.
Reset the Agent. *Confirm?* y/[n]:
P117F(R) Stackable Switch Installation Guide 17