Avaya P117F(R) - Manual (Page 35)

Chapter 3 Configuration
10 (7) – ILMI/ATM Address
This option allows you to define how the ATM address prefix will be allocated to
the P117F(R) unit. To access the ATM address prefix menu select ATM Address:
ILMI/ATM address menu
Visage 16155(R) S/W Version: ____ Slot #: ____
<CR> Refresh the screen
0. Return to Previous Menu
--------------------------------------
1. Display current ATM address prefix
2. Display configured ATM address (ILMI)
3. Display default ATM address (ILMI)
--------------------------------------
4 Change configured ATM address (ILMI)
>>>Enter your choice:
Changing configured ATM address (ILMI)
1. To change the configured ATM address prefix select “Change configured ATM
address (ILMI)”.
You can define the ATM address in two ways: either
• Type 0 for the P117F(R) to use the ILMI protocol to obtain the 13-byte ATM
prefix from the ATM switch, or
• Enter 19 bytes manually: the 13-byte ATM prefix and the 6-byte ATM ESI. The
manual option is intended for switches that do not support the ILMI protocol.
Current ATM address prefix : 39.00.00.00.00.00.00.00.00.6f.07.c0.cb
Configured ATM address : using ILMI
Default ATM address : using ILMI
>>> Enter ATM address (xx.xx ... 19 bytes, 0 for using ILMI) :
39.00.00.00.00.00.00.00.00.5a.07.cf.cb
>>> PRESS Enter to continue:
2. Press Enter to return to the ATM address prefix menu.
3. Reset the module for the changes to take effect (press 0 to return to Main Menu
and then 1 to Reset).
P117F(R) Stackable Switch Installation Guide 33