Australian Monitor Integrator Rack - Manual (Page 8)

10 Mounting the front/rear lock catches
The front and rear lock catches mount on the side panels and allow the front
and rear door to be locked. You will need to use the 4 x M4x8 screws to mount
the lock catches, they mount with the catch facing inside the rack.
NOTE: It is suggested that one screw be installed halfway followed by the
second screw as to stop the small metal piece from spinning on one screw
causing damage to the rack and installer.
PAGE 8 INTEGRATOR RACKS INSTALLATION AND OPERATION MANUAL
PREPARING THE SIDE PANEL